MKIV Underdeck Unit 0 25
Tip: Do not remove foil clamp screws to adjust foil.
Loosen screws, hold foils and bring clamp away
from foils. Adjust and reclamp.
Assembly Feeder/Final
Slide halyard swivel above feeder. Place feeder in foil
recess. Push screw down so tab catches under foil.
Tighten screw.
Note: Screw will turn with some difficulty. It is plastic
coated to prevent loosening due to vibration.
Important: When removing screw, loosen no more
than one full turn. Slide screw up and remove feeder.
Commentaires sur ces manuels